New Arrival China Tapered Allen Head Bolt - ASME B 18.31.5 (HRA) Foundation Anchor Bolt L Shape Bolt – Hongji

Description

QUICK Response

QUICK Quotation

QUICK Delivery

READY TO SHIP DELIVERY

10000+ SKU in warehouse

We Commit for RTS items:

70% items delivered within 5 days

80% items delivered within 7 days

90% items delivered within 10 days

Bulk orders, please contact customer service

Detail description

Please let us know the specific sizes you need so that we could offer the best solutions.

When the mechanical member is installed on a concrete foundation, the J-shaped and L-shaped end of the bolt is embedded in the concrete for use.
The tensile capacity of the anchor bolt is the tensile capacity of the round steel itself, the size is equal to the section area multiplied by the allowable stress value (Q235B:140MPa, 16Mn or Q345:170MPA) is the allowable tensile capacity of the design.
Anchor bolts are generally made of Q235 steel, which is light round. Rebar (Q345) strength, do not make the nut of the wire buckle light round easy. For the optical anchor bolt, the burial depth is generally 25 times of its diameter, and then make a 90-degree bending hook about 120mm long. If the bolt diameter is very large (such as 45mm) and the buried depth is too deep, you can weld the square plate at the end of the bolt, that is, make a big head (but there are certain requirements). The buried depth and bent hook are to ensure the friction between the bolt and the foundation, so that the bolt will not be pulled out.

 Most of the Foundation anchor bolt are plain or HDG surface treatment. Some of them only has the thread HDG treatment and the body is plain color, because the body would be pre-embedded to the concrete and the anti-corrosion performance is not high.

Packing

About us

* The following diagram identifies the different trade incoterms. Please select the one you prefer.